Question: What are the three types of Washington State Patrol inspections for school buses?

School bus inspections, (INITIAL, ROUTINE, ANNUAL (100 percent and 25 percent) , COLLISION, REINSPECT, REPOWER, and REBUILT), will be conducted by Washington State Patrol (WSP) personnel.

Does Washington state have vehicle inspections?

Washington – The state has no safety inspections but the areas of Clark County, King County, Pierce County, Snohomish County, and Spokane County do have smog checks. They will also inspect your VIN when you register an out of state vehicle.

What are school buses used for?

A school bus is a type of bus used for student transport: carrying students to and from school, home, and school events.

What equipment is needed on a trailer in Washington?

All vehicles, trailers, and semi–trailers must be equipped with fenders, covers, flaps, or splash aprons adequate. For passenger cars, motorcycles, mopeds, trailers, and semi–trailers, all such devices shall be as wide as the tires behind which they are mounted and extend down to at least the center of the axle.

THIS IS INTERESTING:  Why are camper vans so expensive?

How high are school bus steps?

Specifications for the school buses have for many years required 16-inch-high steps. Regular city buses are required by law to have bottom steps no more than 17 inches off the ground, but most are in fact no more than 12 inches.

What are the three types of vehicle inspection?

There are three types of vehicle inspections – a courtesy inspection, an insurance inspection, and a 12-point inspection. Courtesy Inspection – a visual inspection of common components (such as lights, oil, and wipers).

What is Patrol inspection?

Classifying inspection by its place, Patrol Inspection means that an inspector patrols the manufacturing site and inspects items on a timely basis. This inspection makes the transportation of items unnecessary, leading to the reduction of manufacturing lead time. …

What is a Type 3 school bus?

TYPE III: Type III school buses and type III Head Start buses are restricted to passenger cars, station wagons, vans, and buses having a maximum manufacturer’s rated seating capacity of ten or fewer people, including the driver, and a gross vehicle weight rating of 10,000 pounds or less.

What are the different types of school buses?

8 Types of School Buses – Understanding the Classification

  • Type A. This class of bus is further sub-divided into two other groups: Type A-1 and Type A-2. …
  • Type B. …
  • Type C. …
  • Type D. …
  • Multifunctional Activity Bus. …
  • School Van. …
  • Alternate Vehicles. …
  • Non-Conforming Vans.

Why are there three lines on a school bus?

Those black stripes are there to help protect the children in the event of a collision. They are known as “rub rails” and they also stop a car that hits the side of the bus from harming the entire side of the vehicle.

THIS IS INTERESTING:  How many meters is a school bus?

Is Flat towing legal in Washington?

Learn the answers to more automotive questions on our blog! Flat towing a vehicle is legal. You can feel free to flat tow your car without breaking the law.

What is the speed limit when towing a trailer in WA?

The maximum legal speed limit for any vehicle towing a trailer or caravan is 100km/h. Vehicles towing a caravan or trailer must drive at least 60m behind heavy vehicles or other towing vehicles, unless overtaking.

Can learner drivers tow a trailer in WA?

Can an L plater tow a trailer? Yes. L drivers are not restricted from towing a trailer as long as the learner driver is driving within the conditions of their learning permit – and this includes having a supervising driver alongside them in the vehicle.

Why do school buses have stairs?

Young children sometimes have a hard time entering and exiting a school bus. The number and spacing of entry steps can help make it easier for them.

What is the length of a regular school bus?

A standard 65 passenger school bus measures about 35 feet long. Typically, most buses range from 20-45 feet. The length of a school bus can be estimated using the Window Rule, which allows an individual to gauge the length in mere seconds.

Why do buses have stairs?

High-floor buses were originally designed to accommodate fuel tanks, air tanks and other mechanical equipment that was located under the cabin floor. … The stairs ruled out public transit for passengers using wheelchairs altogether before the 1980s, when buses began being retrofitted with wheelchair lifts.

THIS IS INTERESTING:  Are Host truck campers 4 seasons?