How do you adjust the spring tension on an RV awning?
Standing at the front of the awning and facing the rear, you need to rotate the front awning leg counter-clockwise. Since this is the side with the ratchet catch, the awning might try to roll up on you some – just tell your helper to hold it tighter. Eventually, you should get it to rotate all the way around.
How do you fix a sagging camper awning?
It’s easy to fix a sagging awning — just crank the handle in reverse until the fabric tightens and be mindful of how the material is rolling. For the best results, make sure the cloth rotates over the top of the roller tube rather than spooling underneath it.
How do you tension a carefree awning?
Have your assistant hold and steady the support bar you’re not working with. Rotate the support bar one turn to tighten the spring. Repeat the process on the other support bar, and reattach the support bars to the RV body with the screws. If the support bars are free-standing, simply rotate them to tension the spring.
How do you manually retract a carefree RV awning?
Retracting the Awning
the gear loop located on the left side of the awning. clockwise to extend the awning. the vertical support legs if used. Turn the handle counterclockwise to retract the awning.
Why is my carefree awning beeping?
If the motion sensor batteries are low, the awning will beep every 30 seconds (when the power switch is ON) and the awning will partially retract. This will continue until the batteries are replaced. The awning will operate normally after the batteries are replaced.