Yes, most of the bus engines made in the past few decades are turbocharged. On buses, the engine is generally installed at the rear, lying down on the left side to free up space in front of the rear door, or upright, which allows better access for maintenance.
What kind of engines do city buses have?
95 percent of all school buses in America are powered by diesel engines because of their reliability, durability and safety. Over half of these (54 percent) rely on the cleanest, near-zero emission diesel engine technology.
Why do buses make turbo noise?
The sound is (probably) compressed-air being released from the pneumatic – or compressed air – braking system as the driver applies the handbrake and/or releases the footbrake. Air brake systems are typically used on heavy trucks and buses.
How powerful are bus engines?
The de-rated Cummins L10 engines delivers 180-Hp. Current London d/d buses are powered by a variety of engines such as the Cummins 6.7-litre 6BTA and the Volvo 7-litre engines, with diesel-electric (with battery) and the BYD battery-electric buses now entering service.
Where are the engines in buses?
The engine is placed in front of the vehicle, ahead of the driver and the front axle line. Positioning the engine ahead of the driver makes the bus spacious. Also, most front-engine buses feature large cabins to accommodate passengers comfortably.
Do NYC buses have turbos?
The low-floor, hybrid electric DesignLine bus runs on a diesel turbine engine, instead of the diesel piston engine that powers the vast majority of New York City Transit’s 4,600 buses. The turbine produces alternating current, which charges the battery that powers the motor that drives the wheels.
Why do buses let out air?
Buses do have air suspension. When the bus stops at a stop a valve is opened to let the air out of the airbags which lowers the front of the bus making boarding and alighting easier for the passengers, especially those with mobility issues. Once the bus is ready to go an onboard air compressor fills the airbags again.
Why do bus engines whine?
Answer has 5 votes. Diesel engines are inherently noisy because of the auto-ignition of the initially formed mixture of fuel-vapour and air, which causes rapid rate of pressure rise producing the characteristic noise.
How much torque does a city bus have?
Torque — and Why it Matters for School Buses
|CUMMINS B6.7 DIESEL ENGINE||CUMMINS WESTPORT B6.7N NATURAL GAS ENGINE|
|200-300 HP||200-240 HP|
|660 LB-FT PEAK TORQUE||560 LB-FT PEAK TORQUE|
|660 LB-FT TORQUE AVAILABLE FROM 1300-2300 RPM||560 LB-FT TORQUE AVAILABLE FROM 1500-2200 RPM|
How much HP does a turbo add?
A turbocharger works with the exhaust system and can potentially give you gains of 70-150 horsepower. A supercharger is connected directly to the engine intake and could provide an extra 50-100 horsepower.
How many Pistons are in a bus engine?
Diesel Bus Engine, 6 Horizontal Cylinder Configuration, Direct Injection. This cut-away is the engine of a diesel bus with 6-cylinder horizon configuration and direct injection.
Why do some buses have a flat front?
The driver is in a low position allowing passengers to look out of the front end above the driver. This coach is more aerodynamic than the city bus seen above: The corners are more rounded and the upper part of the front window is sloping back.
How many cc engine does a bus have?
Engine and Performance
|Engine||H Series CRS, iEGR Technology|
|Engine Displacement||5660 cc|
|Fuel Injection System||Common Rail|
|Fuel Tank Capacity||239 Litres|
What engine is in Bluebird bus?
(Jan. 19, 2021) — This spring, Blue Bird will begin production of its propane and gasoline Vision school buses integrating Ford’s all-new 7.3L V8 engine and a purpose-built fuel system designed specifically for school-bus application.